Yuken Unloading Relive Valves BUCG-06-HV-30
Detailed Product Description
Yuken Unloading Relive Valves BUCG Series
BUCG-06/10 (3/4, 1-1/4)
Sub-plate Mounting
Sub-plate Mounting
These valves are used to operate the pumps with minimum load in
accumulator circuits or in high-low pump circuits.
In accumulator circuits, when the system pressure reaches to a cut out
pressure (adjusted maximum), the valve acts to divert the pump delivery to the reservoir at low pressure, thus the pump is unloaded automatically.
When the accumulator pressure drops to the cut in pressure (refer to
characteristic chart on page 5), the valve directs the pump delivery to the
accumulator and hydraulic system.
An integral check valve prevents reverse flow through the valve from the
accumulator.
In high-low pump circuits, the valve acts to unload the large volume pump with the same manner as described above during load operation of the small volume pump.
accumulator circuits or in high-low pump circuits.
In accumulator circuits, when the system pressure reaches to a cut out
pressure (adjusted maximum), the valve acts to divert the pump delivery to the reservoir at low pressure, thus the pump is unloaded automatically.
When the accumulator pressure drops to the cut in pressure (refer to
characteristic chart on page 5), the valve directs the pump delivery to the
accumulator and hydraulic system.
An integral check valve prevents reverse flow through the valve from the
accumulator.
In high-low pump circuits, the valve acts to unload the large volume pump with the same manner as described above during load operation of the small volume pump.
Yuken Unloading Relive Valves BUCG Series Ordering Code:
Yuken Unloading Relive Valves BUCG Series Model List:
BUCG-06-BV-30
BUCG-06-CV-30
BUCG-06-HV-30
BUCG-10-BV-25
BUCG-10-CV-25
BUCG-10-HV-25
BUCG-06-CV-30
BUCG-06-HV-30
BUCG-10-BV-25
BUCG-10-CV-25
BUCG-10-HV-25
