JUFENG bom thuy luc HGP-3A-F23R-25R-28R-30R
1.Model: HGP-3A-*23*
2.Disp.(ml/r): 23
3.Max pressure: 250kg/cm2
HYDROMAX HGP-3A Series Single Gear Pump
1.Model: HGP-3A-*23*
2.Disp.(ml/r): 23
3.Max pressure: 250kg/cm2
4.Work pressure: 210kg/cm2
5.Speed(r/min): rated 1800 max 3000 min 400
6.Entrance dimensions: Output PT3/4 Input 1/2
7.Weight: 3.35kg
Characteristics. This series of gear pumps and motors available in the form of size 4. Flow rates up to 1081pm, maximum pressure 250bar. Multi-joint combination can be, with a series of meet SAE, DIN, European standard mandrels, flanges and access port assembly form. . After processing of high tensile aluminum alloy body and anti-extrusion die front and back covers, to ensure high volumetric efficiency, mechanical efficiency and low noise characteristics. . Viton seal material of the parts can withstand high temperatures of operation. . The special design of oil-free bearings operating under high pressure. . Can be forward, reverse, reversing. . Synchronous motor can be more joint combination, to achieve more with cylinder synchronization purposes. Synchronization accuracy of 95%, than the average 70% better shunt valve. Technical Note hydraulic oil used. Department of petroleum-based hydraulic fluid, specifications meet the ISO or din standards. Other oil, please contact us. Oil temperature and viscosity. Environmental viscosity range: -15 °C -80 °C (5 °F -176 °F). Viscosity range: 12cSt-800cSt. Recommended viscosity: 16cSt-40cSt. Filtration precision: Suction side-60um; pressure side -10% 25um. Installation and driver. Installation and drive gear pump, must avoid the force of radial or vertical. . Even the shaft deviation angle must be set aside and maintained at 0.8 mm (0.003 ) TIR pressure within the oil port. Into the oil port of the minimum allowable pressure of 0.7bar. Minimum speed. Each type of the minimum allowable pressure:
HGP-05A 800 rpm
HGP-1A 500 rpm
HGP-2A 500 rpm
HGP-3A 500 rpm
If other applications or products, please contact the company. . Using oil exceed 60 °C 140 °F. Motor and gear pump assembly when the non-horizontal. . Self-change when turning or internal parts. Part of the special requirements of materials, such as oil seals, 0-ring or around the cover.
